COPYRIGHT © 2004 MERIT INDUSTRIES, INC.

ATTENTION:

OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DEVICES

Removal/Installation of Hard Drive -

FORCE Upright w/o Coin Door

Troubleshooting Information - Removal/Installation of Hard Drive -

FORCE Upright without Coin Door

Megatouch FORCE Technical Reference Manual

Hard Drive Removal

1. Turn off and unplug the game.

2. Unlock and open the front bezel.

3. Slide the CPU shelf into its service position to access the hard drive.

4. Remove the screw securing the hard drive mounting plate to the shelf (see Figure 1).

5. Remove the 4 screws and shoulder washers fastening the hard drive to the mounting plate.

6. Disconnect the hard drive ribbon cable and the hard drive power connector.

Hard Drive Installation

1. Plug the ribbon cable and power connector into the new hard drive.

2. Fasten the hard drive to the mounting plate with the 4 screws and shoulder washers.

3. Fasten the hard drive mounting plate to the CPU shelf with the mounting screw (see Figure 1).

4. Slide the CPU shelf back into the game.

5. Close and lock the front bezel.

6. Plug in and turn on the game.

FIGURE 1 - HARD DRIVE REMOVAL -

LOCATION OF SCREW SECURING HARD DRIVE MOUNTING PLATE TO CPU SHELF